861,55 € precio sin IVA (1.042,48 € IVA incluido)
Type of boiler: Condensing
Power: 24 kW
The Baxi Neodens Plus 28/28 F ECO is a condensing boiler of 28 kW very compact and efficient with energy efficiency class A for heating and hot water, and XL load profile. Meets ErP European regulations.
Neodens Plus ECO boilers are wall mounted condensing boilers with very small dimensions which can be installed in limited spaces. Its compact and weight greatly reduced dimensions make it an easily integrated product in any living space which speeds up the replacement of old boilers.
Gas include Inverter technology with which you can get additional savings on gas. They also have a modulating high efficiency circulator according to the new European standards ErP allowing additional energy savings, which are more efficient and have a quieter operation.
The control panel with digital display is another highlight of these boilers as it allows an easy and intuitive for the user to access and adjust its key management functions.
Optionally, they have a wide range of accessories to include climate regulators (wired or wireless, simple or programmable). Alongside these regulatory climate, it is always advisable to install an external sensor to maximize comfort and efficiency.
All these models are available in natural gas but are easily adaptable to propane gas. The Neodens Plus ECO boilers are compatible with solar systems and solar kits also have to ensure their integration.
This model of boiler is fully adapted to the new standards ErP as it includes a high-efficiency pump. Has energy efficiency class A for heating and ACS, also it has load profile XL.
Inverter Gas Technology: Efficiency beyond condensation
The Inverter technology incorporated Gas boilers Neodens ECO Plus allows maximum efficiency and, therefore, have a boiler with lower gas consumption even when other condensation and with less environmental impact. Gas inverter has a very low minimum operating power, achieving an extraordinary modulation ratio 1: 7. This wide range of modulation and specific climate regulators allow this range to provide a more tailored to the real needs both heating and domestic hot water (DHW) thereby saving gas and a substantial reduction of pollutant emissions power. The benefits of this technology involve other equally interesting advantages for the user such as a higher level of comfort (especially in the service ACS) and a more stable quieter operation thanks to the performance, with fewer starts and stops the burner, which extends the life of the device and reduces maintenance costs.
Baxi Neodens Plus 28/28 F ECO
Power and performance
Rated power Hot Water: 28 kW
Rated power Heating (80/60ºC): 24 kW
Rated power Heating (50/30ºC): 26.1 kW
Minimum power Heating (80/60ºC): 3.8 kW
Minimum power Heating (50/30ºC): 4.1 kW
Rated yield (80/60ºC): 97.7%
Rated yield (50/30ºC): 105.8%
Yield 30% rated power: 107.6%
ErP Energy efficiency class Heating: A
ErP Energy efficiency class DHW: A
ErP Load Profile DHW: XL
Instant Hot Water flow (DT=25 °C): 16.1 l/min
Minimum Hot Water flow: 2.0 l/min
Maximum operating pressure Heating circuit: 3 bar
Low pressure service Heating circuit : 0.8 bar
Gross capacity expansion tank: 7 liters
Maximum operating pressure on hot water circuit: 8 bar
Minimum pressure on hot water circuit: 0.15 bar
Power supply: 230 V - 50 Hz single-phase
Type of electrical protection: IPX5D
Power and hot water heating: Modulating
Regulation system: Electronic
Selecting Hot Water temperature: From Control Panel
Ignition: Automatic Electronic
Dimensions and weight
Dimensions (H x W x D): 700 x 400 x 299 mm
Approximate weight: 33 Kg
|Type of boiler||Condensing|
|Energy efficiency class (heating)||A|
|Energy efficiency class (DHW)||A|
|ACS con perfil de carga||XL|